My friend riding the longboard around the block. He got up to about 17-20 mph on that run
I had to stop to tighten the pulley on the shaft of the motor but after that I did about 18-19 mph.
The chain tensioner I built was absolute garbage so I took that off completely and moved the motor forward to give me the most tension I possibly could. It was […]
I drilled holes through the bottom of the truck and bolted a piece of thin steel to it. Then, I bent the piece of steel around the truck. Next, I […]
This is my electronics setup for my electric longboard that I am building. These parts cost me about 157$ not including the stuff I already had. My project is documented […]
So my wheels came in the mail a few days ago. They have abec 9 bearings so it rides much smoother than it did before. I spent about a half […]
I let the board bake in the sun for a few days then sanded the paint back down to make everything smooth. I taped the lines back up using frog […]